免费在线看的黄色网站

    1. <form id=vERVJARcp><nobr id=vERVJARcp></nobr></form>
      <address id=vERVJARcp><nobr id=vERVJARcp><nobr id=vERVJARcp></nobr></nobr></address>

      OUR SERVICES


      In Atay Otomat, we are commited to bring an everytime more professional service to all of our products, that is the reason why we guarantee every of our jobs, with the use of the correct equipments.
      In this images we show two of the machines that complement every specific service we offer:


      PROCUT-M
      ? ?60 mm cut capacity
      ?3 HP motor,
      ?cDimension : 762 x 813 x 1425 mm
      ?Spindle Speed 2800 rpm
      ?Wheel dia. 10" max.
      ?Internal illuminator
      ?Double vise design
      ?Quick-action cam vise option
      ?Medium Automation option available




      Automatic Pneumatic Mounting Press
      High speed heater, direct reading pressure gauge, timer with buzzer at end of cycle. Suitable for labs with moderate number of samples.
      Automation offers reduced manual intervention and improved consistency.
      To mount the sample in a plastic mould for convenient preparation.
      ?Easy mould change 1 1/4", 1 1/2"dia and 2"dia
      ?Heater 1200 Watts
      ?Water cooling system
      ?1 Dimension: 490 X 620 X 520 mm










      Salt Spray Testing

      Salt Spray Tester is used for testing parts rust-proof ability that had been through surface treatment such as electroplating, coating, anodizing, etc. With misty form’s salt water to speed up corrosion, in an attempt to test specimen rust-proof ability in short time, this tester is suitable to use in hardware, screw and electroplating industries and research organizations, etc.

      There are three types of tests: Neutral salt spray test, Acetic acid spray test and Copper Speed up Acetic acid spray test.


      Salt Spray Testing



      Coating Thickness Analysis
      Coating Thickness Analysis

      We use the higher quality equipments, in order to give our clients the most accurate information.
      It’s features are the following:

      Metal Finishing

      Minimise production cost of the plating process and maximise production output.
      ? Speed and simplicity of analysis
      – Single or multi elements coating thickness analysis and coating composition.
      – Analysis of up to 4 layers
      – Plating bath analysis


      Micro Structure Analysis

      In order to perform this service, Atay Otomat counts with the latest technology microscope. It’s features speaks for itself.

      +) 4 Heads Trinocular, 45° inclined
      +) Eyepiece WF10X/22mm
      +) Nosepiece 5 positions
      +) Objectives LWD PLAN IOS MET (no cover slide) IOS 5x/0.14, 10x/0.25, 20x/0.4, 50x/0.7
      +) Magnifications 50x, 100x, 200x, 400x
      +) Focusing system Coaxial coarse and fine system, with limit stop
      +) Stage 250 x 230mm; mechanical stage with lowered ergonomic coaxial controls
      +) X-Y range 114 x 81mm
      +) Metallurgy Imaging Software

      Micro Vickers Hardness Testing

      A wide range of test forces from 1.961N to
      490.3N* (.2kgf - 50kgf) is available for measuring
      a wide variety of specimens. The load duration can
      be set in 1sec increments between 5 and 99sec.
      The minimum reading of indentation is 0.1.
      It allows small indentations to be measured with
      high precision.

      Micro Inclusion Testing

      The Micro Inclusion Testing is performed with the same high
      technology microscope than the Micro Structure Analysis,so it’s properties are mentioned above.


      Micro Inclusion Testing
      Welding Macro Testing
      Welding Macro Testing

      This equipment allows to see a cross section of the weld, and see the arrangement of the grains in the parent metal and the weld material.
      This is known as its Macrostructure. Its can also show up defects such as porosity, inclusions and poor fusion.

      Hardness Testing

      In order to determine hardness with presicion, we count with
      the best equipment and highly professional workers to do it.

      Our machine features are the following:

      ? Rockwell 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)
      ? Brinell 612.9 - 1226 - 1839 N (62.5 - 125 - 187.5 kgf)
      ? Vickers - Knoop 98.07 - 490.3 - 980.7 N (10 - 50 - 100 kgf)
      ? Rockwell HR A - B - C - D - E - F - G - H - K
      ? Vickers HV10 - HV60 - HV100
      ? Brinell (at request)
      ? HBW 2.5/62.5 - HBW 5/125 - HBW 2.5/187.5
      ? HBT 2.5/62.5 - HBT 5/125 - HBT 2.5/187.5




      Machinery Table

      Download our informative PDF






             
      INFORMATION
      Home
      Institutional
      Products
      Services
      Contact
      Career
      PRODUCTS AND SERVICES
      Automobile Parts
      Tranformer Parts
      Tractor Parts
      Testing Services
      CONTACT
      Hakk? ?leri Cad. ?merli
      Mahallesi No.74
      Arnavutk?y, Had?mk?y,
      34555, Istanbul, Turkey
      info@atayotomat.com
      Phone: (0212) 577 73 43
      Fax: (0212) 544 61 05
      Follow Us

      Facebook Twitter YouTube PlusGoogle Linkedin
      HoMEmenuCopyrights 2015.All rights reserved.More welcome - Collect from power by english Blok number sss85786789633111 Copyright